Description

Because it incorporates a Camos Jewel camera, there are two views: down to the rear of the van when reversing and back down the road when in a forward gear. The housing simply replaces the existing high-level light and uses the existing 12V lights, so no additional wiring is required. Simply connect the camera's patch lead to the main cable that connects to the monitor.

NOTE: The camera can be used with any Camos monitor; 7" mirror-mounted, 5" dash-mounted and 7" dash mounted. You will also need a connection cable and, if you are using a mirror-mounted monitor, the adaptor cable D4859. You can see all these items at the bottom of this page. Adria motorhomes are usually fitted with a connection cable as standard and this can be used with all Camos Jewel cameras, monitors and cables.

Camos Jewel Brake-Light Information Sheet

Camos Jewel Brake-Light Camera Tech. Drawing

SPECIFICATIONS
PRODUCT CODE: D4863
Manufacturers Product code: 812017
MANUFACTURER: Camos IMC GmbH
Nominal operating Voltage of system - V: 12
Camera housing: Waterproof Plastic
Camera Type: 1.3 Mega Pixel CMOS
Viewing Angle (D) Diagonal (H) Horizontal (V) Vertical: Drive view 80(H) 60 (V) 95 (D) Reverse view 120(H) 90 (V) 140 (D)
Minimum Illumination: 0.2Lux (F=2.4)
I.R. illumination camera: No
Heater in camera: No
Operating temperature: -35 Degrees C to 75 degrees C
Camera protection rating: IP69
Product Net KG: 0.665
Warranty - years: 2
weight: 0.750

WHAT'S IN THE BOX
1 x Jewel Camera
1 x brake light bracket
1 x screw set
1 x manual